
88
Figure 2, Battery Pack and Charger, M28
™
Series (Manufactured by Milwaukee Electric Tool Corp.)
3.2 Additional Information - Battery Pack and
Charger
“M28
™
”,
“M28 REDLITHIUM
™
” and the Milwaukee Electric Tool
logo are trademarks and intellectual property of Milwaukee
Electric Tool Corporation.
The capitalized and italicized “
MILWAUKEE
” text used in
various places throughout this document denotes products
and/or components manufactured by Milwaukee Electric Tool
Corporation.
3.3 Conformance to National & International Standards
Enerpac declares that the XC-1400 Series cordless pump
has been tested and conforms to applicable standards and is
approved to carry the CE, TUV C and US, and FCC certification
marks. An EC Declaration of Conformity is enclosed separately.
3.4 Electromagnetic Compatibility (EMC)
The XC-1400 Series cordless pump has been tested and certified
to conform to CE-EMC emission and immunity standards and
to FCC emission standards.
4.0 IMPORTANT RECEIVING INSTRUCTIONS
Visually inspect all components for shipping damage. Shipping
damage is not covered by warranty. If shipping damage is found,
notify carrier at once. The carrier is responsible for all repair and
replacement costs resulting from damage in shipment.
The pump can be ordered either with or without battery packs
and a compatible AC-powered battery charger. These items will
be included in the shipment if ordered.
5.0 HYDRAULIC CONNECTIONS
The pump contains a 4-way, 3-position manual control valve. It
is designed for use only with double-acting hydraulic cylinders
and devices.
NOTICE
Installation of a pressure gauge in each hydraulic line
is strongly recommended. All hoses and fittings must be rated to
at least 10,000 psi [700 bar].
5
4
6
7
3
3
1
1
2
2
9
8
7
7
6
6
A
B
Figure 3, Hose Connections (typical)
Key:
1. Swivel Connector
2. Pressure Gauge
3. Gauge Adapter/
Hydraulic Fittings
4. Hose (retract)
5. Hose (advance)
6. Coupler (male)
7. Coupler (female)
8. Hydraulic Cylinder
or tool (double-acting)
9. Safety Holding Valve
NOTICE
Hydraulic components are
sold separately and are not included
with the pump.
Shown in this graphic are various
hydraulic components and devices
typically recommended for use with
a double-acting cylinder or tool.
However, actual items required will
vary, depending on application, size
of load, cylinder or tool being used
and other factors.
Содержание XC-1400 Series
Страница 2: ......
Страница 16: ...www enerpac com ...