Enerpac ECSE300, Инструкция

Страница: 6 / 20

6
Product specifications are subject to change without notice.
2.0 PRODUCT DATA
2.1 Cutter Maximum Capacities
Cutter
Model
No.
Material to be Cut
Material Maximum
Tensile Strength
Material Maximum
Hardness
psi daN/mm
2
Rockwell C
ECSE300
Metal tubes, plate, cables and similar materials
during decommissioning or demolition activities
94,275 65 41
NOTICE
Material to be cut must not exceed any of the stated maximum limits shown in this table.
These specifications are independent material limits provided to help prevent premature blade damage. They
should not be considered as an indication of the maximum cutting capacity of the tool.
The tool will not necessarily cut the largest piece of material that will fit between the blades, even if the material
properties are equal to or less than the stated maximum limits.
Cutting performance, including whether a cut can be completed, will depend on the material properties, blade
condition, and the size and shape of the material being cut. If the tool is struggling or failing to make a cut, select
a larger capacity tool.
2.2 General Specifications
Cutter
Model
No.
Spreading Force* Weight
Max. Hydraulic
Operating Pressure
Ambient
Operating Temp
Hyd.
Pump
Tons kN lb Kg psi bar °F °C Type
ECSE300B 5.17 46 33 15 7977 550 -
40
to
+ 122
-
40
to
+ 50
Internal
AC
Electric
ECSE300E 5.17 46 33 15 7977 550
Note:
*
25mm from jaw tips with jaws closed.
2.3 Power and Noise Level Specifications
Cutter
Model No.
Volts Hz Watts Amps
Insulation
Class
Noise Level (typical)
No Load
L
WA
†
No Load
Operator
L
pA
B
ECSE300B 120 60 1200 10.0 II 98 87
ECSE300E 230 50 1100 5.3 II 98 87
Notes:
†
Per CEI EN 60745-1 and CEI EN 60745-2-8 [dB].
B
Per CEI EN 60745-1 and EN ISO 5349.