Copyright © 2009, Energy Aware Technology Inc.
All rights reserved.
Page 5
In order to connect your IHD to your meter's network, contact
your service provider via phone (XXX-XXX-XXXX) or web
(http://www.serviceprovider.com) and request that they allow
your IHD to join. You will then have XX minutes to join your IHD
by holding <L> and <R> for three seconds at the No Network
screen.
Note: It is advisable to keep your IHD connected to external
power while attempting to join a network to prevent any
possible interruptions due to power failure.
Your IHD may take up to 5 minutes to complete the network
joining process. During this time it scans for the network,
authenticates the meter, and then discovers the services
available on the meter.
To remove your IHD from your meter's network:
1. Turn the device off
2.
Turn the device on
3.
While the startup screen is shown, hold <L> and <R> for 10
seconds
4.
Press <L> ("Yes") at the network leave confirmation screen
that appears
Note: Involvement from your service provider will be required
to commission your IHD when you want to join a meter's
network again. Only leave the network if you are moving, or if
you were specifically asked to do so by your service provider.
