Energie FF Evi 10, Инструкция по установке и эксплуатации

Страница: 34 / 59

ENERGIE Page | 32
c) With " " and " " keys select the menu parameter and
enter with " " key;
d) With " " and " " keys select the parameter and enter
with " ". Key;
e) With " " and " " keys go to the parameter r22, enter with " "
key and set the setpoint to DWH, save the value with " " key,
f) Return to the previous menu with " " key;
g) With " " and " " keys select the menu parameter and
enter with " " key;
h) With " " and " " keys go to the parameter P08, enter with " "
key and change the value to 13, save the value with " " key;
i) To return to the previous menu press one time " " key and two
times to menu exit.
After this update the HP are ready to work with two different set
points.
Parameter Description
R03 Heating Setpoint
R04 Differential R03 and R22
R22 Second setpoint
P08 Configure second setpoint
ATTENTION

P08 default value, P08 = 02;

The parameters modified without confirmation via the “ ”
key go back to the previous value;

The second circuit have priority