Energie Aquapura X30, Руководство по установке, Страница: 27 / 40

ENERGIE Page | 25
d) With " " or " " keys select the parameter and enter with "
". Key;
e) With " " or " " keys go to the parameter A08 (Backup set point) ,
enter with " " key and set the new set point, save the value with "
" key,
f) With " " or " " keys go to the parameter A09 (Backup
differential) , enter with " " key and set the new set point, save the
value with " " key,
g) With " " or " " keys go to the parameter A16 (Backup delay) ,
enter with " " key and set the delay time, save the value with "
" key,
h) To return to the previous menu press one time " " key and two
times to menu exit.
ATTENTION
The parameters modified without confirmation via the “ ” key go
back to the previous value.
16.10 Configure/ change backup set point
The defrost cycle has priority over any compressor timing. During the defrost
cycle, the fans remain idle.
Parameter Description Value
D
ON
Start of the defrost cycle. ---
D
OFF
End of defrost cycle. ---
bar
t
D04
D03
D
ON
D05
Reset D05
D05 D07
D
OFF
D08