Energie Aquapura 12, Инструкция по установке и эксплуатации, Страница: 46 / 56

ENERGIE Page | 44
22. Appendix 4 – Wiring diagrams
22.1 Electrical connections inverter 8-12
WARNING : Do not connect (220/240V~) to the terminals mentioned bellow, as this may cause
irreversible damage to the controller and loss of warranty.
WARNING: The digital inputs “Remote Heat/Cool”, “DHW ON/OFF” and “Heat/Cool
ON/OFF” are inactive by default, giving priority to settings made through the console.
To enable digital inputs, you must do the following steps:
1. Press key to access the heat pump settings.
2.
Press 4 “Factory”;
3. Enter the password 066;
4. Change the setting from
“master” to “slave”.