manualshive.com logo in svg

Energica Eva 2018, Руководство пользователя

Поделиться
Скачать
Energica Eva 2018 Скачать руководство пользователя страница 8

7

Warning symbols

This owner manual contains warnings which must be 
strictly observed not only to ensure your safety and that 
of others, but also to prevent damage to your motorcycle.

WARNING!

Failure to observe this instruction may create 
hazardous situations and cause severe injury or 
death.

 

CAUTION!

Failure to observe this instruction may damage the 
motorcycle and/or its components.

IMPORTANT!

Note offering guidance on how to carry out work in 
the most effective way and providing information 
on features of the product.

Environmental notice

Failure to observe this instruction may seriously 
harm the environment.

Warranty

It is in your best interest to ensure that your motorcycle 
remains safe and reliable to use. We therefore strongly 
recommend that you contact our after-sales network 
to undertake any work that requires specialist technical 

expertise. Our highly qualified personnel has the equipment 

necessary to carry out all work to a professional standard, 
and above all, uses only genuine spare parts, which are 
completely compatible with your motorcycle and ensure 
superior performance and durability.

This motorcycle has been configured specifically for the 

operating conditions and requirements for type approval 
in the country of initial purchase and registration. If the 

vehicle is to be used in a different country, modifications 

may be necessary to render the motorcycle suitable for 

the specific operating conditions and compliant with 

type approval requirements, should they be different. No 
warranty claims will be accepted for a vehicle which is 
not compliant with the type approval requirements of the 
country of use.

All motorcycles sold by Energica Motor Company come 
with a "Warranty Card".

During the warranty period, all rights pertaining to the 
warranty shall be forfeited if:

• 

One or more components of the motorcycle is 

tampered with, modified or replaced with a non-

genuine part.

• 

The motorcycle is used for racing or sporting events in 
general.

https://www.motomanuals.net/

Содержание Eva 2018































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды