Energica Eva 2018, Руководство пользователя

Страница: 46 / 126

45
Press to navigate the four power profiles:
• ECO
• URBAN
• RAIN
• SPORT
The different power profiles enable you to change the
settings for the torque output and the power output of the
motorcycle.
Press to confirm the profile you have selected.
See the "Performance" section for more information
on the motorcycle's performance profiles.
Press to navigate the four regeneration
profiles:
• OFF
• LOW
• MEDIUM
• HIGH
Press to confirm the profile you have selected.
The different regeneration profiles enable you to recover
energy during deceleration and then inject this into the
battery as current. The motorcycle produces a different
engine brake effect depending on which of the four
profiles has been selected. The higher the profile, the
greater the engine brake effect during deceleration.
If the battery is fully charged, the YELLOW
symbol will start flashing on the guide screen.
The motorcycle will need to discharge slightly before the
regeneration profile you require can be activated.
You can also set any of the profiles while the motorcycle
is in motion:
• Regeneration profile: For safety reasons, after selecting
a profile it will only be activated once an acceleration
and subsequent deceleration process is complete.
• Power profile: For safety reasons, after selecting a
profile it will only be activated once a deceleration and
subsequent acceleration process is complete.
WARNING! The engine brake effect has not been
activated until the symbol stops flashing. Take care
when decelerating and braking.
https://www.motomanuals.net/