Energetiq LDLS EQ-400, Руководство по эксплуатации

Страница: 20 / 36

14 EQ-400 Operation Manual Rev.
Error! Reference source not found.
Operate switch
Turns the lamp on or off.
Key switch
Enables or disables operation of the lamp. The keyswitch must be in the ENABLE position
for the lamp to operate. The key can only be removed in the DISABLE position.
I/O Interface Connector
Provides access to control and status signals. Control signals are only active when the system
is in remote control mode. See Chapter 3 for pin assignments and functions.
This connector also functions as the remote interlock connector.
Lamp House Control Connector (9-pin D-sub)
Provides various power and control signals to/from the Lamp House module. No other
connector or cable may be used with the EQ-400 other than the one supplied.
RS-485 Connector (9-pin D-sub)
Connector for optional RS-485 interface. See Chapters 3 and 4 for electrical details and
commands.
Power Input Connector
This is a fused IEC 320 inlet connector for AC power input. Fuses are 5 x 20mm, 10A, 250V,
time delay type. See Chapter 3 for detailed information.
Water inlet/outlet fittings
Connections for cooling water for the internal laser module.
Laser fiber
Transmits laser energy from the PCU to the Lamp House.
Lamp House
The Lamp House assembly contains:

Lamp

Igniter

IR pumping optics

Output windows

Laser ON indicator

Control connector