Energetics PR 990 HRC, Компьютерное руководство

Страница: 5 / 60

5
EN
SL
HR
BS
SR
IMPORTANT INFORMATION
SAFETY KEY
The safety key must be inserted into the slot on the console and pushed all the way up in order to operate the tread-
mill. Always insert the safety key and attach the clip to your clothing at your waist before beginning your workout. If
you should encounter problems and need to stop the motor quickly, simply pull down the safety key to shut down
the power. To continue the operation, please turn off the power switch, wait a few seconds and switch it on again,
insert the safety key and push up to the end.
ENGLISH / METRIC CONVERSION
The treadmill computer display can show METRIC and ENGLISH information. This should be preset for your area by the
factory. However, in case the treadmill needs to be converted between METRIC and ENGLISH readout, please follow
the procedure below:
Set the POWER SWITCH to ON. Press the START button on the computer and hold it. Insert the SAFETY KEY then re-
lease the START button. The computer will sound one short beep. Press the START button to switch between ENGLISH
and METRIC and press ENTER button to confirm the setting. The computer will sound a long beep and will return to
the POWER ON mode with the new setting.
POWER ON
Set the POWER SWITCH, located on the base frame, to ON and insert the SAFETY KEY. The LCD window lights up with a
short beep sound. The following values are displayed: SPEED “0.0 km”, WEIGHT “00 kg”, HEIGHT factory setting “160 cm”
and AGE factory setting “30”. If there is any user information that has been input and saved, the LCD window will dis-
play the information from the last input user information.
SLEEP MODE
When the power is ON the computer will automatically enter SLEEP MODE if it is left idle for 3 minutes without receiv-
ing any input. Press any button to return to POWER ON status when the computer is in the SLEEP MODE.
OPERATING INSTRUCTIONS
QUICK START
When the treadmill is in POWER ON status, press the START button to activate the QUICK START program. The SPEED
LED will count down 3 seconds with 3 short beep sounds then start from 1.0 km/h. Press the SPEED UP/DOWN
buttons to change the speed. Press the INCLINE UP/DOWN buttons to elevate the treadmill. The TIME, CALORIES and
DISTANCE will count up from 0.
PAUSE / STOP
During the workout press the STOP/ENTER button once to pause the treadmill. Press the STOP/PAUSE button twice to
delete all workout data and return to POWER ON status.