This fixture is warranted to perform free from defects for five years. If it fails to do so, you may
return it with proof of purchase to 13445 12th St., Chino, CA 91710 for replacement.
Clean with a mild, non-abrasive glass cleaner. Do NOT use solvents or cleaners containing
abrasive agents. Although the fixture is suitable for use in outdoor wet locations, do NOT
use high pressure washer spray to clean fixture.
CARE AND MAINTENANCE
TROUBLESHOOTING
WARRANTY
Problem
Possible Solution
Corrective Action
Fixture does not light.
Circuit breaker trips
when light is turned on.
1. Power is off.
2. Incorrect wire connection.
3. Defective wall switch.
Crossed wires or power
wire is grounded out.
Verify wires are correctly
connected.
1. Check circuit breaker
or wall switch.
2. Check wire splices.
3. Replace switch.
6
INSTALLATION INSTRUCTIONS
Printed in China
www.energeticlighting.com
8. Close the lens front cover and reinstall the two screws
on one side of the fixture housing to complete the
installation.
Fig. 8