Energer ENB540DBT, Инструкция по эксплуатации

Страница: 23 / 33

23
Small diameter drills require a higher speed and as the drill diameter increases
the slower the speed required.
The following drilling speed chart is a guide only and only covers the more
common materials, drill diameters and speeds.
Drill speed chart
Duty cycle(S2)
This product has a rated duty cycle of S2. This product must only be run
continuously for a maximum of 15 minutes. It must be then switched off and
allowed to cool down to room temperature before being run again for 15 minutes.
Drilling speed chart (guide only )
Material to be drilled
Steel Cast iron Gun metal Aluminium Plastics Wood Drill dia
mm Drill speed (min -1 )
3 2500 2500 2500 2500 2500 2500
4 2500 2500 2500 2500 2500 2500
5 1900 2500 2500 2500 2500 2500
6 1900 2500 2500 2500 2500 2500
7 1400 1900 2500 2500 2500 2500
8 1400 1900 2500 2500 2500 2500
9 890 1400 1900 2500 2500 2500
10 890 1400 1900 1900 2500 2500
11 500 890 1400 1900 1900 2500
12 500 890 1400 1400 1900 1900
13 500 500 890 1400 1400 1900
Product functions
GB
IE
In
m
o
re
d
e
ta
il
..
.
NEVER cool with water or water based lubricant otherwise an electric shock
could
or brass. Care should be occur. DO NOT use oil when drilling copper
taken when drilling copper and brass as the drill bit will be prone to jamming.
ENB540DBT by ENERGER