26
EG-PMS2-WLAN PROGRAMMABLE WLAN
SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
loop period. To commit to your changes press the
Apply
button. To delete
the entered schedule press the
Clear schedule
button.
NOTE:
The hardware schedule keeps running even when the device
is powered off. However it is recommended not to power off the device
for longer than 1 week, because the built-in battery might get discharged
then. In this case the internal clock of the device would be reset and as
result some schedule events would not be executed. Besides all the
sockets would lose their previous status (they will be switched on). In
case of an empty battery, just leave the device switched on for one day to
fully charge the battery again.
4.4. Socket Name settings page
On the
Socket name settings
page (see Figure #11 below) you can
assign an applicable name to your sockets. These names will be shown
on
EnerGenie
page (see section 4.2 above) as well as on the
Socket
pages (see section 4.3 above).
NOTE:
The socket names can not be longer than 11 characters.
HINT:
Call your socket by the device which is attached to this socket.
For example call Socket 1 – TV set if your TV is connected to this socket.
