13
EG-PMS2-WLAN PROGRAMMABLE WLAN
SURGE PROTECTOR
All brands and logos are registered trademarks of their respective owners
For the configuration you will have to use any PC which is located
within the reach of your wireless network.
Insert the Power Manager CD into the PC CD-ROM drive.
If for any reason the automatic setup does not work, then open CD-
ROM drive in the
My Computer
window and launch SETUP.EXE from the
CD
If your laptop does not have CD-ROM player, just download the
latest software from www.energenie.com
Follow instructions of the WLAN Config software (see below).
3.3. WLAN and local network configuration
After software installation the
WLAN Config
utility will be started. Once
it appears on the screen, power your EG-PMS2-WLAN on and connect it
to the PC with the supplied USB cable. The device status will change to
“Device is found” (see Figure #4 below).
To configure the device you will need to know the parameters of your
WLAN router: network name (SSID), authentication type and password
(Network key). These are the same parameters you also use when
connecting your PC to your WiFi network. Input these parameters into the