Enerflow generation 5, Руководство пользователя

Страница: 7 / 28

7
COLUMN 1
Time Zone 1
COLUMN 2
Time Zone 2
COLUMN 3
Active Time Zone
O
N at 08h00
OFF at 23h00
O
N at 04h00
OFF at 09h00
O
N at 04h00
OFF at 09h00
Follow the steps below to cancel the Timer Function (thus allowing the heat pump to
reheat the water as and when required during a 24 hour day):
1.
Press the button.
2. Press the
SET
button.
3. Repeat steps 1 and 2 four times to cancel all 4 time settings (1 ON, 1 OFF, 2 ON
and 2 OFF.
NOTE:
•
It is possible to decrease your saving by setting your timers incorrectly (such as
letting the heat pump operatre during the coldest part of the day).
•
The heat pump will operate even without any timers being engaged.
•
For energy efficient timer settings please see Section 9: How to optimise energy savings.
The heat pump will therefore only run between 4 AM and 9 AM irrespective of the first
time Zone allowing it to run till 11 PM
NOTE: Time zones in the Timer Function are NOT allowed to overlap.
The table illustrates an incorrect timer setting where time zone 1 and time zone 2
overlaps with a resulting allowed operational time in column 3
3. Press the button to acknowledge the Hour
setting and continue to the Minutes setting.
(The Minutes and the “ 1 ON ” sign will flash.)
4. Make use of the  buttons to set the Minutes
parameter. (Set to the first start-up Minutes)
5. Press the button to acknowledge the Minutes
setting and continue to the “ 1 OFF ” Hour setting.
(The Hours and the “ 1 OFF ” sign will flash.)
6. Make use of the  buttons to set the Hour .
(Set to the first shutdown Hour )
7. Press the button to acknowledge the Hour setting and continue to the
Minutes setting.
(The
Minutes
and the “
1 OFF
” sign will flash.)
8. Make use of the  buttons to set the
Minutes
.
(Set to the first shutdown Minutes )
9. Press the button to acknowledge the Minutes setting and continue to the
“ 2 ON ” Hour setting.
(The Hours and the “ 2 ON ” sign will flash.)
10. To set up the second time zone, repeat steps 2 to 7 above for “ 2 ON ” and “ 2 OFF ”.
Timer
Active
FOR INFORMATION ONLY
Configuration Management
M-Tech Industrial (Pty) Ltd