U
SER MANUAL
–
ENERIUM
100/200/300
MS1-7352 ENERIUM100/200/300_ Ed04 User Manual
Page 52 / 86
13.4.2 Time (s)
Defines the display duration for each of the selected screens. Proceed as follows:
•
Select the line
Time(s)
with the
keys and press OK.
•
Use the
keys to change the highlighted value and
to move the cursor.
o
The allowable values are from
01
to
10
.
•
Press OK to confirm.
13.4.3 Language
Defines the message display language. Proceed as follows:
•
Select the line
Language
with the
keys and press OK.
•
Use the
keys to change the active language.
o
The available languages are English, French, German, Italian and Spanish.
•
Press OK to confirm.
13.4.4 Contrast
Sets the contrast level of the LCD display. Proceed as follows:
•
Select the line
Contrast
and press OK.
•
Use the
keys to change the contrast level. The longer the bar, the greater the contrast.
•
Press OK to confirm.
13.4.5 Brightness
Sets the brightness level of the LCD display. Proceed as follows:
•
Select the line
Brightness
and press OK.
•
Use the
keys to change the brightness level. The longer the bar, the greater the brightness.
•
Press OK to confirm.
13.4.6 Standby
Sets the brightness level of the LCD display in standby mode. Proceed as follows:
•
Select the line
Standby
and press OK.
•
Use the
keys to change the brightness level in standby mode. The longer the bar, the greater
the brightness in standby mode.
•
Press OK to confirm.
13.5 Password
13.5.1 Changing the password
If the password is different from "0000" (the factory setting corresponding to free access), a password
will be requested when entering the Configuration screen.
Proceed as follows:
•
Select the line
Password
with the
keys and press OK.
