11
ii) Using a suitable container, collect the fuel when removing from the fuel filter assembly
iii) Remove fuel cell (c) and o-ring (b) and wash with clean diesel oil
iv) If necessary replace the fuel cell (c)
v) Inspect the o-ring, replace it if it is cracked, damaged, or deformed
vi) Reassemble the filter assembly checking the o-ring is placed in the right position
vii) Tighten casing (a) by hand, checking the o-ring is pressed
c) To replace the plastic type fuel filter, carry out the following procedure.
i) Remove clips (a) and fuel hoses
ii) Replace fuel filter
iii) Reassemble the filter assembly checking clips (a) are tightened
3) FUEL PUMP ASSEMBLY
a) To replace fuel pump, carry out the following procedure.
i) Remove the top cover access panel (b) by removing screws
ii) Loosen three screws (e) on the fuel pump casing (be sure not to remove the screws)
iii) Remove fuel pump from electric motor and keep plastic coupling for next reassembly
iv) Disconnect wires leading to fuel solenoid valve (g)
v) Reassemble new fuel pump on electric motor being sure that plastic coupling is aligned
vi) Tighten three screws (e)
vii) Reinstall the top cover.
e
g
b