34
35
3. Montaje de la carcasa WDDG1
Instalación en pared, en techo
4. Montaje de la carcasa
W
G
A
pared / techo
K
B
W
G
pared / techo
K
tira del
Teflon
Nota
La cámara viene montada de fábrica en la carcasa
Preparar el lugar de montaje para la instalación
Soltar los 4 tornillos Torx en la carcasa, pero no quitarlos totalmente, y retirar
la tapa
A
Agujeros para los Marcar la posición de la cara posterior de la carcasa
W
en la superficie de
tornillos fijación. Los agujeros
A
para los tornillos de la placa adjunta o de la cara
posterior de la carcasa
W
se pueden utilizar como plantilla.
W
Cara posterior de la Fijar la cara posterior de la carcasa
W
en la superficie deseada (se adjuntan
carcasa los tacos y tornillos con cabeza de ranura en cruz) y sacar el cable.
Agujero de 1/3” o 1/2”.
Nota
En el caso de montaje en techo es preciso alinear la cámara en la carcasa.
G
Tapa de la carcasa Fijar la tapa de la carcasa
G
sobre la pieza posterior de la carcasa.
Cable de conexión Una vez que se haya alimentado la alimentación de corriente y se haya
establecido la unión entre el cable coaxial y el monitor correspondiente, la
cámara está en disposición de funcionamiento.
K
Paso del cable Manguito de goma para el paso del cable