Eneo TVR-2008AM4.0, Руководство пользователя

Страница: 15 / 100

User’s Manual
6
Audio In/Out
NOTE: It is the user’s responsibility to determine if local laws and regulations permit recording audio.
The DVR does not have amplified audio output, so you will need a speaker with an amplifier. The DVR
does not have a pre-amplifier for audio input, so the audio input should be from an amplified source,
not directly from a microphone.
Power Cord Connector
WARNING: ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD. MAKE
CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY FURNITURE.
DO NOT INSTALL POWER CORDS UNDER RUGS OR CARPET.
THE POWER CORD HAS A GROUNDING PIN. IF YOUR POWER OUTLET DOES NOT
HAVE A GROUNDING PIN RECEPTACLE, DO NOT MODIFY THE PLUG. DO NOT
OVERLOAD THE CIRCUIT BY PLUGGING TOO MANY DEVICES IN TO ONE CIRCUIT.
Your DVR is now ready to operate. Refer to
Chapter 3 ─ Configuration
and
Chapter 4 ─ Operation
.
Your DVR can record audio from up to four sources. Connect the audio sources to
Audio In 1
,
Audio In 2
,
Audio In 3
and
Audio In 4
as needed using RCA jacks.
Connect
Audio Out
to your amplifier.
Connect the AC power cord to the DVR and then to a wall outlet.