Eneo MMX, Инструкция по эксплуатации, Страница: 39 / 80

39
5.2 Quad Monitor
Event Monitoring Sequence Monitoring
Quad monitors are connected to a master MMX and slave MMXs and the monitors display video from the connected
MMX in quad- or single-screen layout. The quad monitor is not controlled by a network keyboard, and you can mo-
nitor video on the quad monitor in the preset layout only. Sequence monitoring and event monitoring are supported
according to the preset settings.
NOTES:
• Sequence monitoring allows you to monitor video from user-defined camera channels sequentially.
Camera channels and the sequencing interval should be preset for sequence monitoring.
Refer to
Quad Monitor Layout for details of setting up sequence monitoring.
• Event monitoring allows you to monitor event detected video when the user-defined events occur at the
user-defined camera channels. Camera channels and event types should be preset for event monitoring.
Refer to
Quad Monitor Layout for details of setting up event monitoring.
• Sequence monitoring and event monitoring are not supported in a quad monitor at the same time.
Quad Monitor Layout
. Run the INIT program and connect to the master MMX.
Refer to the INIT User’s Manual for details on the INIT program.
. Go to the following menus: Remote Setup –> Video –>
Quad Monitor
The list of the master MMX and slave MMXs daisy-
chained to the master MMX is displayed. Clicking
each MMX displays the list of quad monitors
(max. 4) connected to the MMX. Only one layout is
supported for each quad monitor, and clicking the
Edit
button allows you to edit the layout.
NOTE: The layout number indicates the Quad
Out number of the MMX that the Quad
monitor is connected. For example, Quad
Monitor 1 indicates the layout of the
Quad monitor connected to Quad Out 1
port of the MMX.
3. Click the
Edit
button and the main monitor setup screen appears. Select the desired layout from the
Layout
drop-down menu at the upper right corner of the layout setup screen. Select the camera or group in
Camera
List
or
Sequence & Event Group List
in the left and allocate the camera or group to the desired pane in the
layout.