Eneo MEB-62F0036P0A, Руководство пользователя

Страница: 20 / 32

ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
20
6-1. AUTO (AGC/CDS)
6-1-1. D → N (AGC/CDS):
6-3-1. BURST :
Sets the BURST option ON/OFF to output burst signal in B/W mode.
Used when DAY or NIGHT is determined by light level through the lens and
DAY from/to NIGHT is switched automatically by the scene brightness.
It can be controlled the threshold level and delay time.
6-2. EXT
D→N is a threshold level which determines to switch from DAY to NIGHT.
Lower(Higher) value makes the camera switch from Day to Night at
lower(higher) illumination. If it stays in Day(Color) mode at night time,
increase DAY→NIGHT threshold value until it just switches to Night.
6-1-3. N → D (AGC/CDS):
N→D is a threshold level which determines to switch from NIGHT to DAY.
Lower(Higher) value makes the camera switch from Night to Day at
lower(higher) illumination. If it stays in NIGHT(B/W) mode at day time,
decrease NIGHT→DAY threshold value until it just switches to DAY.
6-1-2. D → N (DELAY):
D → N DELAY is time in second while camera maintains its status before
Day to Night switches. DELAY can avoid the unwanted/frivolous switching
by a short term lights such as light from the passing car.
6-1-4. N → D (DELAY):
N → D DELAY is time in second while camera maintains its status before
Night to Day switches.
EXT is not related to this model. AUTO(CDS) works like EXT.
6-3. B/W
The camera is always in B/W mode.
Forcibly removes IR cut filter and switches to B/W regardless of light level.
6-3-2. IR SMART :
6-3-3. IR PWM* : Not Available
• LEVEL (0~15): Sets the IR brightness level
• AREA: Sets the IR SMART working area with position and size.
SMART IR can be set to reduce the saturation by the strong IR illumination
in the night in any menu. Zero(0) turns off SMART IR and High setting
avoids the saturation strongly but the corners will be darker accordingly.