Eneo MEB-62F0036P0A, Руководство пользователя

Страница: 17 / 32

ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
17
DEFOG
1. POS/SIZE
2. GRADATION
3. DEFAULT
4. RETURN RET
0
llllllllllllllllllllll
: Adjusts the brightness of video(1~100).
3-4. BRIGHTNESS
• AUTO: SENS-UP is enabled or disabled automatically by the scene brightness.
Higher SENS-UP can get the brighter video but the slower frame rates with more
white pixels. If set to AUTO, maximum integration limit for SENS-UP can be set
to x2, x4, x6, x8, x10, x15, x20, x25, x30 in SENS-UP menu.
• OFF: Disables SENS-UP.
: The brighter video can be obtained by increasing the exposure time in the night
with SENS-UP. SENS-UP is the maximum integrations of frame by DSS (Digital
Slow Shutter) in the low light.
3-3. SENS-UP
: AGC(0~15) amplifies the video gain for brighter video but noise and white pixel
accordingly. AGC level less than 10 disables AUTO in DAY/NIGHT.
3-2. AGC
3-5. D-WDR
※
CVBS video signal:Connecting 2nd video to CVBS port disables D-WDR
function temporary. It should be considered when installer adjusts the video
with installation monitor via CVBS video signal.
: Enhance the foggy video according to status of scene. Video quality can be
less in normal environments. Setting to AUTO, it can be adjusted working
area on screen.
3-6. DEFOG
(default: OFF)
: Sets the position and size
to make activated area box.
: Sets the level from 0 to 10.
3-6-1. POS/SIZE
3-6-2. GRADATION
: Restores to factory default.
3-6-3. DEFAULT
: Improves the visibility for the high bright area and the dark area by compen-
sating the video gain. Selects OFF, AUTO or ON. With D-WDR On, the level
can be set. Care should be taken to select this mode because video may
lose its quality in some environments by the over compensation.
Video noise can be increased in the dark area accordingly.