31
Port ID
Displays the ID of the current port.
Port Protection
Displays the port protection status of the
current port.
5.4.1 Port Protection Example
Configure the requirements
In a residential environment, all users are in a VLAN, but users can not access each other,
and the gateway can only communicate to access the Internet. In this case, the product is
placed in residential buildings, of which 1 to 6 ports In connection with the user, the other
port for the uplink connection.
Configure the topology
Configuration steps
【
method 1
】
Enter the [Interface Management] - [Port Protection] menu bar, and select Enable Port
Protection to set ports 1 to 6 as isolated ports, that is, ports 1 to 6 can not access each other.
Click the button to modify settings, Then click the button on the bottom of the page to save
the configuration so that the configuration takes effect. As shown below:
