Eneo HDC-1004M1080 Скачать руководство пользователя страница 7

Страница: 7 / 20

•

CAM TITLE:

Enable user to choose any

  word in screen. (Maximum 10 letter is
  available)
  1. A letter Choice from the screen using
    Menu key
  2. Enable user to move to next menu using
    LEFT, RIGHT KEY in LOCATION
  3. By using UP, DOWN, LEFT, RIGHT KEY,
    enable user to choose any letters in
    LOCATION and then get back to previous
    step.
  4. Enable user to finish words choice and
    position by using LEFT, RIGHT KEY in
    RETURN
•

LANGUAGE:

Enable user to set up an OSD

language
-> ENGLISH, RUSSIAN, SPANISH,

GERMAN, FRENCH, PORTUGUESE

• COMM ADJUST:

Enable user to set up

  CAMERA ID, BAUDRATE
  1. CAM ID: Enable user to set up Camera ID
    (1~255)
  2. BAUDRATE: A communication speed to
    communicate with external device.
    (2400, 4800, 9600, 19200, 38400, 57600,
    115200)
  3. APPLY: Enable user to setting of
    Communication
•

PRIVACY:

Privacy is the function that covers

  the some part on screen to prevent private
  life. (maximum 30 point covered)
  1. ZONE NO: Enable user to set up a position
    from 0 to 29 areas
  2. MASK MODE: Enable user to set up screen
    output of chosen position
  3. X-POSITION: Mask Horizontal start position
  4. Y-POSITION: Mask Vertical start position
  5. X-SIZE: Mask Horizontal width
  6. Y-SIZE: Mask Vertical height
  7. COLOR: Set the mask colour
  8. TRANSPARENCY: Set the transparency of the mask
  9. INITIAL: Enable user to initialize setting of PRIVACY MENU
•

MOTION:

Motion detection function

  1. RESOLUTION: Enable user to set up
    resolution
  2. SENSITIVITY: Enable user to set up
    sensitivity
  3. WINDOW USE: Enable user to select to
    motion area
  4. WINDOW TONE: Enable user to area
    window tone
  5. X-POSITION: Window Horizontal start position
  6. Y-POSITION: Window Vertical start position
  7. X-SIZE: Window Horizontal width
  8. Y-SIZE: Window Vertical height
  9. INITIAL: Enable user to initialize setting of MOTION DETECT

•

DISPLAY:

Enable user to set up a screen

  marking of CAM ID, CAM TITLE, MOTION,
  DZOOM
  1. CAM ID: Enable user to set up ID for RS485
  2. CAM TITLE: Enable user to set up output
    in fixed CAM TITLE
  3. MOTION: Enable user to set up output of
    MOTION on the screen as MOTION ON
    setting
  4. DZOOM: Enable user to set up output DZOOM ratio
  5. INITIAL: Enable user to initialize of DISPLAY menu

• SYSTEM

  1. DEFECT DET: White pixel detection and
    compensation function
  2. DOUT FORMAT: Enable user to set up
    digital output format (720p, 1080p)
  3. DOUT FPS: Enable user to set up digital
    output frame rate
  4. FREQ: Enable user to set up power-
    frequency (50Hz, 60Hz)
  5. CVBS: Enable user to set up CVBS type NTSC or PAL
  6. APPLY: Enable user to setting of SYSTEM

5.7 FACTORY DEFAULT

Enable user to reset all of the status as the factory default

5.8 EXIT

After saving the current settings in the OSD menu and exit

6. HOT KEY

To quickly switch CVBS type (NTSC or PAL), push LEFT KEY or RIGHT KEY more than
2 seconds and push SET KEY.

7. Pelco "D" Protocol Commands

Most widely used Commands

5.6 SPECIAL

Setting up the CAM TITLE, LANGUAGE,
PRIVACY, MOTION, DISPLAY, SYSTEM

BYTE1

BYTE2