Eneo DMR-5008/500, Руководство по эксплуатации

Страница: 50 / 88

User’s Manual
42
Primary Monitor
Highlight Primary Monitor and press the
button, and the Primary Monitor setup screen appears.
Figure 34 : Display – Primary Monitor setup screen.
Highlight the box beside Mode and press the button. You can select between Full Sequence and Cameo Sequence.
Pressing the
SEQUENCE
button on the remote control or selecting (Sequence) in the Live Monitoring menu causes
the DVR to sequence cameras, and the DVR can sequence cameras in two modes: “Full” and “Cameo”. In the Full
mode, the DVR sequences through the cameras and displays them full screen. In the Cameo mode, the bottom right
window in a multi-screen format sequences through the cameras.
NOTE: Any cameras that are Off, have lost video or are set to Covert (unless the user has authority to view covert
cameras) will be excluded from the Cameo sequence.
You can define the screen layout in a variety of formats and set the DVR to sequence through the different screen layouts
(pages) so that all the cameras will be displayed. You can also set up the DVR to display one camera or a group of
cameras all the time while cycling through the remaining cameras in a “cameo” window. This can be done with one
camera displayed full screen while displaying the cameo window as a PIP (picture in picture), or displaying the cameras
in a grid pattern with the bottom right window as the cameo.
NOTE: Sequence cannot be used in the 4x4 display mode of the 16-channel, and 3x3 mode of the 8-channel DVR.
You can adjust the display dwell time by highlighting the box beside Interval and pressing the button. You can
select dwell intervals ranging from 1 second to 1 minute.
Highlight
Event Monitoring On
and press the button. Pressing the button toggles between
On
and
Off
. When
it is
On
, the DVR will display the camera associated with the event when an event occurs.
Highlight the box beside Resolution and press the button. You can select from 1280x1024, 1440x900, 1600x900,
1680x1050 and 1920x1080 for NTSC video, and 1280x1024, 1440x900, 1600x900, 1680x1050 and 1920x1080 (@
60Hz or 50Hz) for PAL video.
Highlight the box beside Hide Unsupported Resolution and press the button. Pressing the button toggles between
On and Off . When it is On , the unsupported resolution on the connected monitor will not be shown.
NOTE: When selecting unsupported resolution, video might NOT be displayed on the monitor screen. In this
case, pressing the
DIPSLAY
button for more than five seconds will change to the different frequency (Hz)
resolution or restart the system and display video with the maximum resolution supported on the monitor.
Highlight Fit To Screen and press the button. Pressing the button toggles between On and Off . When it is On ,
the DVR will resize video to fit to the primary monitor screen.
Highlight the box beside Apply Monitor Information and press the button. Pressing the button toggles between
On and Off . When it is On , the DVR will provide clearer display by applying the monitor information.