11
DAY & NIGHT: COLOR,
B/W
and
EXT
, are selectable for DAY/NIGHT switch.
COLOR:
The image is colored in day mode all the time
B/W:
The image is black and white all the time, and the IR led turns on in the poor light
conditions. Under the B/W mode, you can turn on/off the IR led to meet the requirement
of different circumstances and set the value of IR Smart in this menu.
IR Smart:
The function is used to adjust the light to its most suitable intensity and avoid
the image from over-exposure.
Level:
The IR level value is set from 0 to 15. The higher the value is, the more obvious
effects are.
Area:
Set its area parameters as <Position>, <Size> <RET> and <Again> etc.
EXT:
The option allow you set its switch delay time when the mode is switched from
D
N or N
D
D
N (Day to Night) : is used to control the delay time of switching the <Day> to the
<Night> mode. You can set the value from 0 to 60. The smaller the value is, more
quickly the camera switch between the two modes.
N
D (Night to Day) : is used to control the delay time of switching the <Night> to the
<Day> mode. You can set the value from 0 to 60. The smaller the value is, more quickly
the camera switch between the two modes.
Adjust/Special:
The menu is used to mainly adjust video parameter setting. Its sub-menu has a
bit difference between Fixed and VF version. Details please refer to the above Menu structure.
NR (Noise Reduction):
The 2 DNR function can decrease the noise effect, especially
when capturing moving images in poor light conditions. You can set the below 2DNR
parameters:
OFF
,
LOW
,
MIDDLE
and
HIGH
Sharpness
: determines the amount of detail an imaging system can reproduce. You can
set the Sharpness parameters as
Auto
&
OFF
. Under the <
Auto
> mode, you can set its
Level, Start AGC, End AGC etc Its setting value is as follows:
Level
value from 0 to 10
Start AGC
value from 0 to 255
End AGC
value from 0 to 255
Monitor:
the option allows you adjust monitor‘s parameters; you can set its parameters as
<GAMMA>
,
<Blue Gain>
and
<Red Gain>
etc.
GAMMA: Its parameter covers the <user, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80,
0.85, 0.90, 0.95, 1.00>, The larger the value is, the darker screen brightness is.
Blue Gain:
Set the value from 0 to100
Red Gain:
Set the value from 0 to 100.
LSC:
increase the brightness of the image margin. You can set as <
ON
> and <
OFF
>,
under the <
On
> sub-menu, you can adjust the brightness of screen margin.
Mirror
:
OFF
,
MIRROR
,
V-FLIP
and
ROTATE
are selectable for mirror.
OFF
: The mirror function is disabled.
Mirror
: The image flips 180
0
horizontally
V
-
Flip
: The image flips 180
0
vertically.
Rotate
: The image flips 180
0
both horizontally and vertically.
