6
N
ote: Press in different direction and hold the Joystick of camera for 3 seconds to switch the video
output
.
Four kinds of video outputs are available: TVI, AHD, CVI and CVBS under the fixed mode.
UP:
stands for AHD mode
Down:
stands for CVBS mode
L:
stands for TVI mode
R:
stands for CVI mode
2 Installation and Configuration
Before you start
Make sure that the device in the package is in good condition and all the assembly parts are
included.
Make sure that all the related equipment is power-off during the installation.
Check whether the power supply is matched with your power output to avoid any damage.
If the wall is cement, insert expansion bolts before installing it. If the wall is wooden, use self-tapping
screws to secure the camera.
If the product does not function properly, do NOT disassemble the camera for repair or maintenance
by yourself.
2.1 Package Contents
The package contains the following.
Camera
1
Template Sheet
1
User Manual
1
Accessory Kit
1
2.2 Installation
2.2.1
VF Bullet Camera
Pic.2
Accessory Kits
Template Sheet
User Manual
Camera 1PC
1. Paste the drill template (supplied) to
the place where you want to install
the camera shown as Pic 3
Pic. 3
2.
Drill the screw holes and the cable
hole (optional) in the ceiling/wall
according to the drill template.
3.
Mount the bullet camera and f ix the
base of the camera to the ceiling or
wall shown as Pic 4
Pic. 4
