ENEL 150AC, Руководство пользователя

Страница: 12 / 19

12
5. OPTIONAL ACCESSORY
(Can be supplied with rectifier for an extra fee)
1. 3m welding cable 1x25mm
2
terminated with an electrode holder K-160.
1)
2. 3m welding cable 1x25mm
2
terminated with an electric clamp ZBK35.
1)
3. Welding cable with a DUALTIG 26/4 welding torch with dual control button
of TRAFIMET.
6. OPERATING INSTRUCTIONS
6.1. PREPARATION THE WELDING MACHINE TO OPERATION
Figure 2
1. ENEL150AC welder is manufactured as a protection class I device and
because of users safety should be connected only to the electrical socket
provided with the protective (earth) conductor. Electrical supply circuit
should be protected with a time-delayed fuse rated at 20A or automatic
circuit breaker, e.g. S191B20 of FAEL production.
2. After connecting the electrical plug to a power socket, the welding
machine switch located on the rear panel should be lit.
3. The rectifier should be placed in a dry place, so that free inflow and
outflow of cooling air is allowed. It is not permitted to cover the ventilation
openings.
4. Select the operation mode with M button (5) (Fig. 1)
5. Preparation the rectifier for MMA welding:
1 )
Other length cables are available on request.