Endress+Hauser Turbimax CUS71D, Руководство по эксплуатации

Страница: 17 / 32

Turbimax CUS71D Electrical connection
Hauser 17
5.3 Post-installation check
Check the following:
• Are the sensor and cable undamaged?
• Is the cap undamaged?
• Is the orientation correct?
• Is the sensor installed in an assembly and not suspended from the cable?
Avoid the penetration of moisture by fitting the protective cap on the assembly.
6 Electrical connection
L
WARNING
Device is live!
Incorrect connection may result in injury or death!
‣
The electrical connection may be performed only by an electrical technician.
‣
The electrical technician must have read and understood these Operating Instructions and
must follow the instructions contained therein.
‣
Prior to commencing connection work, ensure that no voltage is present on any cable.
6.1 Connecting the sensor
1. Connect one sensor (maximum) to the Liquiline CM442. Connect up to 4 sensors to the
Liquiline CM444 and CM448 transmitters.