Endress+Hauser Prosonic M FMU41, Краткое руководство по эксплуатации

Страница: 5 / 28

Prosonic M FMU41 HART Incoming acceptance and product identification
Hauser 5
3.5.2 EAC conformity
The device meets the legal requirements of the applicable EAC Directives. These are listed in
the corresponding EAC Declaration of Conformity along with the standards applied.
Hauser confirms successful testing of the device by affixing to it the EAC mark.
3.6 IT security
We only provide a warranty if the device is installed and used as described in the Operating
Instructions.
Provide additional protection for the device and data transfer to/from the device
‣
IT security measures defined in the plant owner/operator's own security policy must be
implemented by plant owners/operators themselves.
4 Incoming acceptance and product identification
4.1 Incoming acceptance
Check the following during goods acceptance:
 Are the order codes on the delivery note and the product sticker identical?
 Are the goods undamaged?
 Do the nameplate data match the ordering information on the delivery note?
 If necessary (see nameplate), are the Safety Instructions, e. g. XA, provided?
If one of these conditions is not satisfied, contact your Sales Center.
4.2 Product identification
The following options are available for identification of the device:
• Nameplate specifications
• Extended order code with breakdown of the device features on the delivery note
‣
Enter serial number from nameplates in W@M Device Viewer
( www.endress.com/deviceviewer )
 All of the information on the measuring device and on the scope of the technical
documentation pertaining to the device is displayed.
‣
Enter the serial number from the nameplate into the Hauser Operations App or
scan the 2-D matrix code on the nameplate.
 All of the information on the measuring device and on the scope of the technical
documentation pertaining to the device is displayed.