Endress+Hauser Prosonic M FMU41, Краткое руководство по эксплуатации

Страница: 20 / 28

Commissioning Prosonic M FMU41 HART
20 Hauser
 or 
• Navigate downwards in the picklist.
• Edit the numeric values within a function.
Simultaneously  
Navigate to the left within a function group.

• Navigate to the right within a function group.
• Confirm entry
Simultaneously   or  
Set the contrast of the LCD
Simultaneously   
Lock or unlock the hardware
Further information is available in the Operating Instructions.
7.4 Locking/unlocking parameter configuration
Further information is available in the Operating Instructions.
8 Commissioning
8.1 Switching on the device
After the supply voltage has been switched on, the device is first initialized. The following is
then displayed for approx. five seconds:
• Device type
• Software version
Parameters the device asks for the first time it is switched on:
• Language
Select the language of the display.
• Length unit
Select length unit for measuring distance
• Basic setup
Measured value is visible, which does not yet indicate the level in the tank
Perform basic setup
8.2 Connecting via FieldCare
This section describes commissioning using the local display.
Commissioning via FieldCare is the same as with the onsite display.