Endress+Hauser Proline Promass I 100 Скачать руководство пользователя страница 82

Страница: 82 / 84

Proline Promass I 100

Hauser

Wireless HART adapter

SWA70

Is used for the wireless connection of field devices.

The WirelessHART adapter can be easily integrated into field devices and existing

infrastructures, offers data protection and transmission safety and can be operated

in parallel with other wireless networks with minimum cabling complexity.

For details, see Operating Instructions BA00061S

Fieldgate FXA320

Gateway for the remote monitoring of connected 4-20 mA measuring devices via a

Web browser.

For details, see "Technical Information" TI00025S and Operating Instructions

BA00053S

Fieldgate FXA520

Gateway for the remote diagnostics and remote configuration of connected HART

measuring devices via a Web browser.

For details, see "Technical Information" TI00025S and Operating Instructions

BA00051S

Field Xpert SFX350

Field Xpert SFX350 is a mobile computer for commissioning and maintenance. It

enables efficient device configuration and diagnostics for HART and FOUNDATION

Fieldbus devices in the

non-Ex area

For details, see Operating Instructions BA01202S

Field Xpert SFX370

Field Xpert SFX370 is a mobile computer for commissioning and maintenance. It

enables efficient device configuration and diagnostics for HART and FOUNDATION

Fieldbus devices in the

non-Ex area

and the

Ex area

For details, see Operating Instructions BA01202S

Service-specific accessories

Accessories

Description

Applicator

Software for selecting and sizing Hauser measuring devices:

• Calculation of all the necessary data for identifying the optimum flowmeter: e.g.

nominal diameter, pressure loss, accuracy or process connections.

• Graphic illustration of the calculation results
Administration, documentation and access to all project-related data and

parameters over the entire life cycle of a project.
Applicator is available:

• Via the Internet:

https://wapps.endress.com/applicator

• On CD-ROM for local PC installation.

W@M

Life cycle management for your plant

W@M supports you with a wide range of software applications over the entire

process: from planning and procurement, to the installation, commissioning and

operation of the measuring devices. All the relevant device information, such as

the device status, spare parts and device-specific documentation, is available for

every device over the entire life cycle.

The application already contains the data of your Hauser device. Endress

+Hauser also takes care of maintaining and updating the data records.
W@M is available:

• Via the Internet:

www.endress.com/lifecyclemanagement

• On CD-ROM for local PC installation.

FieldCare

FDT-based plant asset management tool from Hauser.

It can configure all smart field units in your system and helps you manage them. By

using the status information, it is also a simple but effective way of checking their

status and condition.

For details, see Operating Instructions BA00027S and BA00059S

Commubox FXA291

Connects Hauser field devices with a CDI interface (= Hauser

Common Data Interface) and the USB port of a computer or laptop.

For details, see "Technical Information" TI00405C

Содержание Proline Promass I 100





















































































Результаты поиска

Содержание Proline Promass I 100

Отзывы:

Похожие инструкции для Proline Promass I 100

Бренды по названию

Популярные бренды

Endress+Hauser Proline Promass I 100, Техническая информация

Результаты поиска

Содержание Proline Promass I 100

Отзывы:

Похожие инструкции для Proline Promass I 100

Бренды по названию

Популярные бренды