Endress+Hauser Proline Promass 84, Инструкции по вводу в эксплуатацию

Страница: 15 / 44

Commissioning Instructions for PTB gas approval Proline Promass 84 Operation and commissioning
Hauser 15
4 Operation and commissioning
4.1 Operating options
Different options are available for the configuration, commissioning and operation of the measuring
device:
• Onsite operation (optional)
• Configuration programs (e.g. FieldCare)
• HART protocol or Modbus RS485 communication (depending on measuring device version)
Exact information on these topics can be found in the accompanying operating instructions
(BA00109D, Proline Promass 84 HART or BA00129D, Proline Promass 84 Modbus RS485).
4.2 Hardware configurations
Using hardware switches, different configurations can be set up depending on the measuring device
version:
• Hardware write protection

on/off
• Device address
• Terminating resistors
• Configuration of current output

active/passive
• Configuration of relay output

NC contact/NO contact
• Configuration of pulse/frequency output

Line monitoring
Exact information on this topic can be found in the accompanying operating instructions
(BA00109D, Proline Promass 84 HART or BA00129D, Proline Promass 84 Modbus RS485).
4.3 Quick setups
Using quick setups, the measuring device can be commissioned quickly, and different configurations
(depending on the measuring device version) can be set up:
• Commissioning
• Pulsating flow
• Gas measurement
• Communication (only Proline Promass 84 Modbus RS485)
Exact information on this topic can be found in the accompanying operating instructions
(BA00109D, Proline Promass 84 HART or BA00129D, Proline Promass 84 Modbus RS485).