Endress+Hauser Proline Promass 83, Руководство по эксплуатации

Страница: 39 / 118

Proline Promass 83 FOUNDATION Fieldbus 5 Operation
Hauser 39
Readings displayed
The display area consists of three lines in all; this is where measured values are displayed, and/or
status variables (direction of flow, bar graph, etc.). You can change the assignment of display lines
to different variables to suit your needs and preferences (
→
see the “Description of Device
Functions” manual).
Multiplex mode:
A maximum of two different display variables can be assigned to each line.
Variables multiplexed in this way alternate every 10 seconds on the display.
Error messages:
The modes of presentation for system and process error messages are described in detail on Page 43
ff..
a0001173
Fig. 25: Typical display for normal operating mode (HOME position)
1 Main display line: shows primary measured values, e.g. mass flow in [kg/h].
2 Additional line: shows measured variables and status variables, e.g. totalizer No. 3 in [t].
3 Information line: shows additional information on the measured variables and status variables, e.g. bar graph of the
limit value achieved by the mass flow.
4 “Info icons” field: Icons representing additional information on the measured values are shown in this field. For a
full list of the icons and their meanings
→
Page 40
5 “Measured values” field: The current measured values appear in this field.
6 “Unit of measure” field: The units of measure and time defined for the current measured values appear in this field.
!
Note!
In the HOME position, you can use the +/– keys to call up a list containing the following informa-
tion:
• Totalizer values (including overflow)
• Tag name (DEVICE PD-TAG
Press
OS
→
to view individual values in the list
Simultaneously press Esc key (
X
)
→
to return to HOME position
1
4 5 6
2
3
+24.502
+1863.97
x
x
y
y
–50 +50
%
v
v
3
S