Endress+Hauser Proline Promag W 400 HART, Руководство по эксплуатации

Страница: 108 / 198

Commissioning Proline Promag W 400 HART
108 Hauser
Navigation
"Setup" menu → Advanced setup → WLAN Settings
‣
WLAN settings
WLAN IP address →  108
Security type →  108
WLAN passphrase
→  108
Assign SSID name →  108
SSID name →  108
Apply changes
→  108
Parameter overview with brief description
Parameter Prerequisite Description User entry /
Selection
Factory setting
WLAN IP address – Enter IP address of the device
WLAN interface. 4 octet: 0 to 255 (in
the particular octet) 192.168.1.212
Security type – Select the security type of the
WLAN interface. • Unsecured
• WPA2-PSK WPA2-PSK
WLAN passphrase In the Security type
parameter, the WPA2-PSK
option is selected.
Enter the network key (8 to 32
characters).

The network key
supplied with the device
should be changed
during commissioning
for security reasons.
8 to 32-digit
character string
comprising numbers,
letters and special
characters Serial number of the
measuring device
(e.g. L100A802000)
Assign SSID name – Select which name will be used
for SSID: device tag or user-
defined name. • Device tag
• User-defined User-defined
SSID name In the Assign SSID name
parameter, the User-defined
option is selected.
Enter the user-defined SSID
name (max. 32 characters).

The user-defined SSID
name may only be
assigned once. If the SSID
name is assigned more
than once, the devices
can interfere with one
another.
Max. 32-digit
character string
comprising numbers,
letters and special
characters
Apply changes – Use changed WLAN settings. • Cancel
• Ok Cancel
10.5.6 Using parameters for device administration
The Administration submenu systematically guides the user through all the parameters
that can be used for device administration purposes.