Endress+Hauser PROline promag 23 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 108

background image

PROline Promag 23

5 Operation

Hauser

47

5.4

Communication (HART)

In addition to local operation, the measuring device can be configured and measured
values can be obtained by means of the HART protocol. Digital communication takes
place using the 4–20 mA current output HART (see Page 34).

The HART protocol allows the transfer of measuring and device data between the HART
master and the field devices for configuration and diagnostics purposes. The HART
master, e.g. a handheld terminal or PC-based operating programs (such as FieldTool),
require device description (DD) files which are used to access all the information in a
HART device. Information is exclusively transferred using so-called “commands”. There
are three different command groups:

Universal commands:

All HART device support and use universal commands. The following functionalities are
linked to them:

Identify HART devices

Reading digital measured values (volume flow, totalizer, etc.)

Common practice commands:

Common practice commands offer functions which are supported and can be executed
by most but not all field devices.

Device-specific commands:

These commands allow access to device-specific functions which are not HART stan-
dard. Such commands access individual field device information, amongst other things,
such as empty/full pipe calibration values, low flow cut off settings, etc.

!

Note:
Promag 23 has access to two command classes. On Page 48, you will find a list with all
the supported “Universal Commands”.

5.4.1

Operating options

For the complete operation of the field device, including device-specific commands,
there are Device Description (DD) files available to the user to provide the following ope-
rating aids and programs:

HART Communicator DXR 275

Selecting device functions with a HART Communicator is a process involving a number
of menu levels and a special HART function matrix.

The HART Communicator manual

contains more detailed information on the device.

FieldTool operating program

FieldTool is a universal service and configuration software package designed for the
PROline field devices. Connection is by means of a HART-Modem, e.g. Commubox FXA
191.

The functionality of FieldTool includes the following:

Configuration of device functions

Visualization of measuring values (including data logging)

Data backup of device parameters

Measuring-point documentation

You can find more information on FieldTool in the following E+H document:
System Information: SI 031D/06/en “FieldTool”

«
...
45
46
47
48
49
...
»

Содержание PROline promag 23













































































































Отзывы:

Нет отзывов

Похожие инструкции для PROline promag 23

Бренд: Kathrein Страницы: 10

Бренд: MadMan Страницы: 37

Бренд: MADDALENA Страницы: 5

Бренд: Raytech Страницы: 18

Бренд: Parkside Страницы: 120

Бренд: Conrad Electronic Страницы: 38

Бренд: WATERGUARD Страницы: 2

Бренд: Agilent Technologies Страницы: 198

Бренд: FuzzDog Страницы: 6

Бренд: Sage Страницы: 75

Бренд: LORECa Hearing Instrument Страницы: 43

Бренд: Kane Страницы: 36

Бренд: Oasis Страницы: 8

Бренд: Casio Страницы: 24

Cable Analyzer SC48RJ

Бренд: Whirlwind Страницы: 2

Бренд: PCE Instruments Страницы: 20

Бренд: Gatekeeper Страницы: 2

Бренд: Midtronics Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды