Endress+Hauser Proline Cubemass C 300, Руководство по эксплуатации

Страница: 124 / 216

Commissioning Proline Cubemass C 300
124 Hauser
10.5.7 Configuration management
After commissioning, you can save the current device configurationor restore the previous
device configuration.
You can do so using the
Configuration management parameter and the related options
found in the Configuration backup submenu.
Navigation
"Setup" menu → Advanced setup → Configuration backup
‣
Configuration backup
Operating time →  124
Last backup →  124
Configuration management →  124
Backup state →  124
Comparison result →  124
Parameter overview with brief description
Parameter Description User interface / Selection Factory setting
Operating time Indicates how long the device has been in
operation. Days (d), hours (h), minutes
(m) and seconds (s) –
Last backup Shows when the last data backup was saved
to HistoROM backup. Days (d), hours (h), minutes
(m) and seconds (s) –
Configuration management Select action for managing the device data in
the HistoROM backup. • Cancel
• Execute backup
• Restore
*
• Compare
*
• Clear backup data
Cancel
Backup state Shows the current status of data saving or
restoring. • None
• Backup in progress
• Restoring in progress
• Delete in progress
• Compare in progress
• Restoring failed
• Backup failed None
Comparison result Comparison of current device data with
HistoROM backup. • Settings identical
• Settings not identical
• No backup available
• Backup settings corrupt
• Check not done
• Dataset incompatible Check not done
* Visibility depends on order options or device settings