Endress+Hauser Proline 300, Краткое руководство по эксплуатации

Страница: 32 / 36

Commissioning Proline 300 Modbus RS485
32 Hauser
8.3 Configuring the measuring device
The Setup menu with its submenus and various guided wizards is used for fast commissioning
of the device. They contain all the parameters required for configuration, such as for
measurement or communication.
Depending on the device version, not all submenus and parameters are available in every
device. The selection can vary depending on the order code.
Example: Available submenus, wizards Meaning
System units Configure the units for all measured values
Communication Configure the communication interface
I/O configuration User configurable I/O module
Current input Configuration of the input/output type
Status input
Current output 1 to n
Pulse/frequency/switch output 1 to n
Relay output
Double pulse output
Display Configure the display format on the local display
Low flow cut off Set the low flow cut off
Advanced setup Additional parameters for configuration:
• Sensor adjustment
• Totalizer
• Display
• WLAN settings
• Data backup
• Administration
8.4 Protecting settings from unauthorized access
The following write protection options exist in order to protect the configuration of the
measuring device from unintentional modification:
• Protect access to parameters via access code
• Protect access to local operation via key locking
• Protect access to measuring device via write protection switch
For detailed information on protecting the settings against unauthorized access, see the
Operating Instructions for the device.
For detailed information on protecting the settings against unauthorized access in
custody transfer applications, see the Special Documentation for the device.