Proline 200 FOUNDATION Fieldbus
Commissioning
Hauser
27
8.4
Configuring the measuring device
The
Setup
menu with its
System units
submenu and various guided wizards enable fast
commissioning of the measuring device.
The desired units can be selected in the
System units
submenu. The wizards systematically
guide the user through all the parameters required for configuration, such as parameters for
measurement or outputs.
The wizards available in the particular device can vary on account of the device version
(e.g. sensor).
Wizard
Meaning
Select medium
Define the medium
Pulse/frequency/switch output
Configure the selected output type
Analog inputs
Configure the analog inputs
Display
Configure the measured value display
Low flow cut off
Set the low flow cut off
Partially filled pipe detection
Configure partial and empty pipe detection
Current input
Configure the current input
8.5
Defining the tag name
To enable fast identification of the measuring point within the system, you can enter a unique
designation using the
Device tag
parameter and thus change the factory setting.
1
XXXXXXXXX
A0029422
4
Header of the operational display with tag name
1
Tag name
Navigation
"Setup" menu → Device tag
