Proline 200 FOUNDATION Fieldbus
Electrical connection
Hauser
19
5. To ensure that moisture does not enter the cable entry:
Route the cable so that it loops down before the cable entry ("water trap").
A0029278
6. Insert dummy plugs into unused cable entries.
5.4
Post-connection check
Are cables or the device undamaged (visual inspection)?
Do the cables used meet the requirements→ 12?
Do the cables have adequate strain relief?
Depending on the device version: are all the device plugs firmly tightened → 16?
Does the supply voltage match the specifications on the transmitter nameplate → 15?
Is the terminal assignment correct ?
If supply voltage is present, do values appear on the display module?
Are all housing covers installed and firmly tightened?
Is the securing clamp tightened correctly?
