Endress+Hauser OUSAF11, Руководство по эксплуатации

Страница: 15 / 28

OUSAF11 Electrical connection
Hauser 15
5.3 Post-installation check
Put the sensor into operation only if you can answer "yes" to the following questions:
• Are the sensor and cable undamaged?
• Have you chosen a correct mounting angle?
6 Electrical connection
L
WARNING
Device is live
Incorrect connection may result in injury or death
‣
The electrical connection may be performed only by an electrical technician.
‣
The electrical technician must have read and understood these Operating Instructions and
must follow the instructions contained therein.
‣
Prior to commencing connection work, ensure that no voltage is present on any cable.
6.1 Connecting the sensor
The sensor is connected to the transmitter using the pre-terminated or labeled sensor fixed
cable.
YE
RD
WH
YE
BK
BK
GY
A0029261
 8 OUSAF11 fixed cable
CM44P terminal CVM40 terminal Cable color Assignment
P+ V1.1 YE (thick) Lamp v
S+ V1.3 YE (thin) Detection of lamp v
S- V1.4 BK (thin) Detection of lamp voltage -
P- V1.2 BK (thick) Lamp voltage -
A (1) S1.1 RD
C(1) S1.2 WH Sensor -
SH (1) S1.S GY Shield