Endress+Hauser Cleanfit W CPA450, Руководство по эксплуатации

Страница: 12 / 36

Installation Cleanfit W CPA450
12 Hauser
3.3 Installation
3.3.1 Measuring system
A complete measuring system consists of:
• Cleanfit W CPA450 assembly
• DO/pH/ORP sensor, length 120 mm (4.72"), e.g. Orbisint CPS11D
• Transmitter, e.g. Liquiline M CM42 or Mycom S CPM153
• Measuring cable, e.g. CYK10 or CPK9
Optional:
• RM junction box for use with extension cable
• CYK81 measuring cable for extended cable runs
a0005322
Fig. 6: Measuring system with CPA450
1 Cleanfit assembly
2 Measuring cable
3 Mycom S CPM153
4 Liquiline M CM42
3.3.2 Required tools
You require the following tools to install the sensor in the assembly and the assembly in the process:
• Allen key M5
• Hook wrench (included)
• Wrench AF 20
• Adjustable open-end wrench (up to 45 mm (1.8"))
• Open-end wrench set (flange connection only)
MEAS MEAS CAL
DIAG PARAM
?
Messen Hold
Aus Wahl
pH
7.00
ATC
Temperatur 25.0 °C
2
3
4
1