Endress+Hauser Cleanfit W CPA450, Руководство по эксплуатации

Страница: 15 / 36

Cleanfit W CPA450 Installation
Hauser 15
Reassemble the assembly
1. Insert the assembly in the ball valve (pos. 7).
2. Tighten the lock ring using the supplied hook wrench.
3. Make sure that the compression fitting (pos. 3) is only opened by ½ revolution.
4. Adjust the setting collar (pos. 2) to the desired immersion depth and lock it in that position
using an Allen wrench.
5. Open the ball valve (pos. 13).
6. Push the immersion tube into the process until stopped by the setting collar.
7. Tighten the compression fitting with the hook wrench.
3.4 Post-installation check
• After installation, check that all connections are firmly in position and leak-tight.
• Ensure that the hoses of the rinse water connections (optionally) cannot be removed without
force. These hoses are in contact with the medium and must be secured accordingly.
• Check all hoses for damage.