Endress+Hauser Analytik Jena multi EA 4000, Руководство по эксплуатации

Страница: 7 / 151

multi EA 4000 Basic information
7
1 Basic information
1.1 User manual notes
The analyzer multi EA 4000 is intended for operation by qualified specialist personnel
observing this user manual.
The user manual informs about the design and operation of the analyzer and provides
personnel familiar with elementary analysis the necessary expertise for the safe han-
dling of the equipment and its components. The user manual further includes notes on
the maintenance and service of the equipment and potential causes and remedies of
any faults.
Instructions for actions that occur in chronological order are numbered and combined
in action units.
Warnings are indicated by warning triangles and a signal word. The type, source and
consequences of the danger are stated together with notes on preventing the danger.
The elements of the control and analysis program are indicated as follows:

Program terms are indicated by small caps (e.g., F
ILE
menu).

Buttons are shown by square brackets (e.g., [OK]).

Menu items are separated by arrows (e.g., F
ILE

O
PEN
).
The user manual uses the following symbols and signal words to indicate hazards or
instructions. The warnings are always placed before an action.
WARNING
Indicates a potentially hazardous situation that might cause death or very serious inju-
ries (deformities).
CAUTION
Indicates a potentially hazardous situation which might cause light or minor injuries.
NOTICE
Provides information on potential material or environmental damage.
Conventions
Symbols and
signal words used