RESET
In case you’ve tweaked everything so hard you’ve distorted signal main outputs,
there is a soft reset that adjusts all advanced / secondary parameters to their
default values, so you may start tweaking from the beginning.
Press all four buttons simultaneously and hold them for more than 3 seconds.
PATCH EXAMPLES
KARPLUS-STRONG SYNTHESIS
ROUTING 1
Ghost can function as a complete Karplus-Strong Voice by using the delay at the
shortest time setting for sound generation and built-in filter, VCAs and envelope as
tonal / dynamics control.
Set the
ROUTING
mode to the first order (
FX
DISTORTION
VCF
) when
ROUTING
button LED is off
Set
REPEATS
to maximum with
TIME/DIV
delay time turned fully CCW.
Moderately adjust
DELAY DRY/WET
to the 12 o’clock
Feed any audio to the GHOST audio inputs to start up the Karplus-Strong
sound generation. You will hear a strong recirculating oscillator sound. Its amplitude
is rather high therefore it is convenient to adjust it by
DELAY DRY/WET
knob
Patch a trigger / gate signal from your sequencer to the
SIDECHAIN TRIGGER
input: this will trigger an internal envelope that will come out from the
ENVELOPE
OUT
. The decay of the envelope is controlled by the
SIDECHAIN
knob
Patch the signal from the
ENVELOPE OUT
to either:
DELAY DRY/WET CV IN
or the
POST-VCA
input to shape our oscillator in different stages
Split the
ENVELOPE OUT
signal and patch it to the
VCF CV
input for additional
tonal shaping
Connect the 1v/oct PITCH CV output from your sequencer and patch it to the
TIME CV 1V/OCT
input of the DELAY
TIP:
if you would like to add one extra octave to the available PITCH range of
the delay, set the
TAPS DISTRIBUTION
to STEREO mode via
ROUTING
+
TAP
.
Содержание GHOST 16hp
Страница 1: ...FIRMWARE V 1 00 RC ...
Страница 5: ...INTERFACE ...
