Endorphines GHOST 16hp, Руководство пользователя

Страница: 12 / 17



DELAY:
stereo delay with 1v/oct tracking, capable of Karplus-Strong
synthesis. The delay can be synchronized externally via CLOCK IN , or by using the
onboard TAP TEMPO BUTTON , with maximum delay time of 2.5 seconds. 3
configurations of delay taps are available, toggled between by holding the
ROUTING button and short pressing the TAP button. Delay tap configurations are
LRLR, LRRL, and STEREO mode, also known as true stereo, where taps will appear
at OUT 1 or OUT 2 only if something is present at IN 1 or IN 2 respectively.


REVERB:
lush stereo hall reverb with additional controls and configurations
such as tail decay adjustment, pre-delay adjustment, reverse reverb and audio
freezing.


MID/SIDE
widener stays after the reverb and increases the stereo field
simultaneously with the amount of TAIL reverb knob. This feature is best audible on
true stereo signals processed with the GHOST.
Both delay and reverb have advanced secondary parameters and modes that can
be accessed by pressing the
ROUTING button in combination with either a knob or
another button. These controls are internal and do not have CV control; they are
designed as ‘set and forget’ controls to fine-tune your sound.
ADVANCED DELAY PARAMETERS


R REPEATS KNOB:
controls the light TILT EQ that
adjusts the TONE / brightness of repetitions: from sparkling clean to dub delays.
That TONE* range for repeats is identical to TONE input shaping control.


R TAP BUTTON:
switches the way the delay taps are
distributed (hard panned) in the stereo OUTPUTS 1/2. When the TAP button blinks
once – the taps appear on OUTPUTS 1 and 2 in an LRLR pattern. When the TAP
button blinks twice – the tap pattern is LRRL . When the TAP button blinks 3
times – STEREO mode is selected, where the delay taps appear on
either L or R output only when there is something present on L or R input, aka true
stereo operation. The true stereo mode shortens the maximum delay time by half.

 NOTE: Tap tempo via the TAP button doesn’t work if an external clock is
applied.