Endorphin.es ANDREW HUANG GHOST 16hp, Руководство пользователя

Страница: 12 / 19

THREE FLAVORS OF DISTORTION
DIST
 /GAIN: digital input gain (3) capable of light saturation, adjusted with
ROUTING + TONE/gain*
 DISTORTION: 8x oversampled distortion algorithm with a single (8) knob
control
 /DRIVE: final output saturator when VOLUME (34) is pushed to the top of its
range, as indicated around the knob on the panel
THREE FLAVORS OF FILTER
VCF
 Bipolar LP/HP filter
 BAND­PASS filter ( BPF )

COMB filter with resonator at high resonance settings.
To switch the filter type you simply press the BPF/COMB button. A single press will
switch the filter type to a band­pass, and a combination of ROUTING +
BPF/COMB buttons will change the filter type to Comb, which is also capable of
self­oscillation at full CW or CCW RESONANCE settings. Resonance knob behavior
in Comb filter is special: it is bipolar, so from noon it either adds negative (CCW) or
positive combs (CW).
SPATIAL EFFECTS
FX
This chain of audio effects (a.k.a. FX ) consists of a delay which is then routed into
the reverb with mid/side widener.

DELAY:
stereo delay with 1v/oct tracking, capable of Karplus­Strong
synthesis. The delay can be synchronized externally via CLOCK IN , or by using the
onboard TAP TEMPO BUTTON , with maximum delay time of 2.5 seconds. Three
configurations of delay taps are available, toggled between by holding the
ROUTING button and short pressing the TAP button. Delay tap configurations are
LRLR, LRRL, and STEREO mode, also known as true stereo, where taps will appear
at OUT 1 or OUT 2 only if something is present at IN 1 or IN 2 respectively.

REVERB:
lush stereo hall reverb with additional controls and configurations
such as tail decay adjustment, pre­delay adjustment, reverse reverb and audio
freezing.