Endo HKS15N1300-18, Инструкция по эксплуатации

Страница: 7 / 9

k
"#$%&
㸱 㸫 㸯 㸬 ཯ ຊ ྾ ཰ ࣂ ࣛ ࣥ ࢧ ࣮ ࡢ ᤣ ࠼ ௜ ࡅ
㸯㸧༑ศ࡞ᙉᗘࢆ᭷ࡍࡿᨭᣢ㒊ᮦ࡟ྲྀࡾ௜ࡅ࡚ࡃࡔࡉ࠸ࠋ
ᮏయ࣍ࣝࢲ࡟ྲྀࡾ௜ࡅ࡚࠶ࡿභゅ✰௜࣎ࣝࢺ
㸦㹋㸴™㸲㸳㸧ࢆ฼⏝ࡋ࡚ࡃࡔࡉ࠸ࠋ
␃ ព 㸸 ཯ຊ྾཰ࣂࣛࣥࢧ࣮ࡀ࿘ᅖࡢࡶࡢ࡟ࡪࡘ࠿ࡽ
࡞࠸ࡼ࠺࡟ྲྀࡾ௜ࡅ࡚ࡃࡔࡉ࠸ࠋ
㸰㸧⿵ຓ࣡࢖࣮ࣖࣟࣉࡲࡓࡣࢳ࢙࣮ࣥࡢ୍➃ࢆᮏయ࡟
ྲྀࡾ௜ࡅࠊࡶ࠺୍᪉ࡢ➃ࢆ཯ຊ྾཰ࣂࣛࣥࢧ࣮ࡢ
ᨭᣢ㒊ᮦ࡜ࡣูࡢᨭᣢ㒊ᮦ࡟ྲྀࡾ௜ࡅ࡚ࡃࡔࡉ࠸ࠋ
␃ព㸸
⿵ຓ࣡࢖࣮ࣖࣟࣉࡲࡓࡣࢳ࢙࣮ࣥ࡟ࡣࠊ
཯ຊ྾཰ࣂࣛࣥࢧ࣮ࡀ⮬⏤࡟ືࡅࡿࡼ࠺࡟
ࠕࢱ࣑ࣝࠖࢆタࡅ࡚ࡃࡔࡉ࠸ࠋ
ࢱ࣑ࣝࡣࠊ࣍ࣝࢲࡸᨭᣢ㒊ᮦࡀ◚ᦆࡋࠊ
཯ຊ྾཰ࣂࣛࣥࢧ࣮ࡀⴠୗࡋ࡚ࡶ㸯㸮㸮㹫㹫
௨ෆ࡛೵Ṇࡍࡿ㛗ࡉ࡟ࡋ࡚ࡃࡔࡉ࠸ࠋ
㸦ᅗ㸫㸯ཧ↷㸧
ᅗ㸫㸯
㸱㸫㸰㸬ᕤලࠊᶵჾ㢮ࡢྲྀࡾ௜ࡅ
㸯㸧࠶ࡽ࠿ࡌࡵࠊᕤල㸦ᶵჾ㸧࡜ࢣ࣮ࣈࣝࡢ⥲㉁㔞㸦㔜㔞㸧ࢆ☜ㄆࡋ࡚ࡃࡔࡉ࠸ࠋ
㸰㸧ᕤලࢆᣢࡕୖࡆ࡚཯ຊ྾཰ࣂࣛࣥࢧ࣮ࡢ࣍ࣝࢲ࡟ྲྀࡾ௜ࡅࡲࡍࠋ
ࣃ࢖ࣉࡣᘬࡁฟࡉ࡞࠸࡛ࡃࡔࡉ࠸ࠋ
␃ព 㸸ᕤලࡢ㉁㔞㸦㔜㔞㸧ࡀࢫࣉࣜࣥࢢࡢᙇຊࢆ㉺࠼࡚࠸ࡿሙྜࡣࠊᕤලࡀ㝆ୗࡋࡲࡍࠋ
ᡭࢆᨺࡉࡎࡺࡗࡃࡾ࡜ୗࡆ࡚ࡃࡔࡉ࠸ࠋ
㸱㸧ࢫࣆࣥࢻࣝࢆᅇࡋࢫࣉࣜࣥࢢࡢᙇຊࢆㄪᩚࡋࡲࡍࠋ
ᄓ
㆙࿌
ە
཯ຊ྾཰ࣂࣛࣥࢧ࣮ࢆṇࡋࡃᤣ࠼௜ࡅ࡚ࡃࡔࡉ࠸ࠋ
ە
཯ຊ྾཰ࣂࣛࣥࢧ࣮࡟ࡣᚲࡎ⿵ຓ࣡࢖࣮ࣖࣟࣉࡲࡓࡣࢳ࢙࣮ࣥࢆྲྀࡾ௜ࡅ࡚ࡃࡔࡉ࠸ࠋ
୓୍ࠊ཯ຊ྾཰ࣂࣛࣥࢧ࣮ࡢ࣍ࣝࢲࡸᨭᣢ㒊ᮦ㸦ࡘࡾ㔠ල㸧ࡀ◚ᦆࡋࡓ࡜ࡁࠊసᴗ⪅ࢆಖㆤࡍࡿࡓ
ࡵ࡟ᚲせ࡛ࡍࠋ
ᄓ
ὀព
ە
✵Ⲵ࡛ࣃ࢖ࣉࢆᘬࡁฟࡉ࡞࠸࡛ࡃࡔࡉ࠸ࠋ
ࡶࡋࠊᘬࡁฟࡋࡓ࡜ࡁ࡟ㄗࡗ࡚ᡭࢆᨺࡍ࡜ࠊࣃ࢖ࣉࡀᛴ㏿࡟ୖ᪼ࡋே㌟஦ᨾࡢཎᅉ࡜࡞ࡾࡲࡍࠋ
Copied
௨ෆ࡛೵Ṇࡍࡿ㛗ࡉ࡟ࡋ࡚ࡃࡔࡉ࠸ࠋ ௨ෆ࡛೵Ṇࡍࡿ㛗ࡉ࡟ࡋ࡚ࡃࡔࡉ࠸ࠋ
digital
ࢱ࣑ࣝࡣࠊ࣍ࣝࢲࡸᨭᣢ㒊ᮦࡀ◚ᦆࡋࠊ
཯ຊ྾཰ࣂࣛࣥࢧ࣮ࡀⴠୗࡋ࡚ࡶ㸯㸮㸮㹫㹫 ཯ຊ྾཰ࣂࣛࣥࢧ࣮ࡀⴠୗࡋ࡚ࡶ㸯㸮㸮㹫㹫
௨ෆ࡛೵Ṇࡍࡿ㛗ࡉ࡟ࡋ࡚ࡃࡔࡉ࠸ࠋ ௨ෆ࡛೵Ṇࡍࡿ㛗ࡉ࡟ࡋ࡚ࡃࡔࡉ࠸ࠋ
data
from
㸱㸫㸰㸬ᕤලࠊᶵჾ㢮ࡢྲྀࡾ௜ࡅ 㸱㸫㸰㸬ᕤලࠊᶵჾ㢮ࡢྲྀࡾ௜ࡅ
from
http://www.endo-kogyo.co.jp/
㸱㸫㸰㸬ᕤලࠊᶵჾ㢮ࡢྲྀࡾ௜ࡅ 㸱㸫㸰㸬ᕤලࠊᶵჾ㢮ࡢྲྀࡾ௜ࡅ
http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/
}
3. Installation
3-1. Counter reaction balancer installation
ᄓ
WARNING
࣭
Install the Counter reaction balancer correctly.
࣭
Always attach a secondary support cable or chain.
It is required to protect worker(s) in case of failure of the holder or fitting.
1) The strength of the fitting installed in Counter
reaction balancer is plenty for Supporting Counter
reaction balancer.
Install spring rod in the fitting with Cap Screw
(M6*45) mounted in Holder.
NOTE: Take care Counter reaction balancer does not
hit surrounding objects.
2) Attach an end of the secondary support cable or chain
to Counter reaction balancer body,
and attach the another end to a separate fitting
does not support Counter reaction balancer.
NOTE: Leave some slack in the secondary Support
cable or chain to allow the Counter reaction
balancer to rotate freely.
The slack must be a suitable length so
that the Counter reaction balancer
will stop within 100mm when falling
in case of failure of the top hook or
the fitting (See Fig.1).
Fig.1
3-2. Tool/device attachment
ᄓ
CAUTION
࣭
Never pull the pipe when unloaded.
If the pipe is released when extended with no load, it will snap back and could cause
personal injury.
1) Before attaching, check the mass (weight) of the complete tool/device and cable.
2) Lift the complete tool/device up to the holder and attach it.
Never pull the pipe down to the tool/device.
NOTE: The suspended tool/device will drop down if the spring tension is not enough.
Lower the tool/device slowly by hand.
3) Adjust the spring tension by turning the spindle.
will stop within 100mm when falling will stop within 100mm when falling
in case of failure of the top hook or in case of failure of the top hook or
the fitting (See Fig.1). the fitting (See Fig.1).
digital
cable or chain to allow the Counter reaction
The slack must be a suitable length so The slack must be a suitable length so
that the Counter reaction balancer that the Counter reaction balancer
will stop within 100mm when falling
data
Leave some slack in the secondary Support Leave some slack in the secondary Support
cable or chain to allow the Counter reaction cable or chain to allow the Counter reaction
from
3-2. Tool/device attachment 3-2. Tool/device attachment
from
http://www.endo-kogyo.co.jp/
The slack must be a suitable length so
will stop within 100mm when falling will stop within 100mm when falling
in case of failure of the top hook or in case of failure of the top hook or
http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/ http://www.endo-kogyo.co.jp/