Contact 1.800.762.1142 for assistance.
Do not return to place of purchase.
®
Owner’s manual: model 235000 outdoor patio heater
7
Assembly Instructions
General Components & Features
Familiarize yourself with all components before proceeding . Refer to page 6 for hardware and components, and page 21 for specifications .
The white ceramic cone in the top of the engine is an important piece. DO NOT REMOVE.
Do NOT attempt assembly unless all components are available . If you believe a component is missing or damaged, contact 1 .800 .762 .1142 for
assistance .
Note:
All hardware is mounted on a cardboard pack and numbered to match their assembly step .
Additional Requirements
The following items are not included, but are necessary for the proper assembly of your heater . Do NOT attempt to assemble without proper tools .
A hex (Allen) wrench is necessary and is included in the parts bag .
(1) 7/16” Wrench
(1) 9/16” Wrench
(1) 7/16” Socket Wrench
(1) #2 Phillips Head Screwdriver
(1) Leak Detection Solution (Instructions on how to make solution are included in step 12)
(1) Precision Filled LP Gas Grill Cylinder with Acme Type 1 external threaded valve connection (4-5 gallon size)
Note: You must follow all steps to properly assemble heater .
Step 1 – Attach Legs to Base
Secure legs to base using 6 sets of large bolts (D), small lock washers (I), and small
nuts (F) . Finger tighten only .
Do not fully tighten until step 2 .
Attach small ‘s’ hook on cylinder restraint chain to left leg .
