Contact 1.800.762.1142 for assistance.
Do not return to place of purchase.
®
Owner’s manual: model 235000 outdoor patio heater
18
Maintenance
To enjoy years of outstanding performance from your heater, make sure you perform the
following maintenance activities on a regular basis:
Keep exterior surfaces clean .
Use warm soapy water for cleaning . Never use flammable or corrosive cleaning agents .
While cleaning your unit, be sure to keep the area around the burner and pilot
assembly dry at all times . Do not submerge the control valve assembly . If the gas
control is submerged in water, do NOT use it . It must be replaced .
Air flow must be unobstructed . Keep controls, burner, and circulating air passageways
clean . Signs of possible blockage include:
Gas odor with extreme yellow tipping of flame .
Heater does NOT reach the desired temperature .
Heater glow is excessively uneven .
Heater makes popping noises .
Spiders and insects can nest in burner or orifices . This dangerous condition can
damage heater and render it unsafe for use . Clean burner holes by using a heavy-duty
pipe cleaner . Compressed air may help clear away smaller particles .
Carbon deposits may create a fire hazard . Clean dome and emitter with warm soapy
water if any carbon deposits develop .
Note:
In a salt-air environment (such as near an ocean), corrosion occurs more quickly
than normal . Frequently check for corroded areas and repair them promptly .
WARNING
FOR YOUR SAFETY
• Do NOT touch or move heater for at
least 45 minutes after use.
• Dome is hot to the touch.
• Allow dome to cool before
touching.
TIP:
Use high-quality automobile wax to help maintain the appearance of your heater .
Apply to exterior surfaces from the pole down . Do not apply to emitter screen or
domes .
